Press to find out more
Marine Frames
Hawke Transit Frames are available in mild steel, stainless steel and aluminium. Specialist applications frames can be manufactured to suit customers specific requirements. Furthermore, Hawke Transit Frames can be manufactured as open frames for applications where the cable is already installed. Besides that, multiple frames are available as a combination of two or more apertures arranged horizontally, vertically or both combined.
All possible combinations of dimensions and openings are supplied.
HMX
Rectangular frame for marine applications made from 10mm thick steel. The HMX frame can be used for standard applications, is to be welded to a pre-cut metallic bulkhead or deck.
Available in four standard sizes with 120mm width (internal) and four standard sizes with 60mm width (Internal).
HMFX
Rectangular frame with a flange for marine applications made from 10mm thick steel with a 60mm flange. The HMFX frame can be used for standard applications, is to be welded to a metallic bulkhead or deck.
Available in four standard sizes with 120mm width (internal).
HMCX
The HMCX is a rectangular frame with round corners to reduce the risk of stress fractures within stress applications. Frame with round R30 corners, very useful for narrow areas in bulkheads and decks. Made from 10mm thickness steel.
Available in four standard sizes with 120mm width (internal).
Reinforced Marine Frames
For all reinforced Marine frames goes that, multiple frames are available as a combination of two or more apertures arranged horizontally, vertically or both combined.
All possible combinations of dimensions and openings are supplied.
HMBX
Back to back frame for use when extra pressure and fire resistance is needed. HMBX is a double frame which is packed from both sides. Also applicable for sealing cable routes in uninsulated HO rated areas.
Available in four standard sizes with 120mm width (internal).
HMRX TB
Standard HMX frame with end fillet pieces with radius corners added to the top and bottom sides of the frame for high stressed area applications.
Available in four standard sizes with 120mm width (internal).
HMEX
Standard HMX frame extended using a 10mm thick welded collar. For use in a corrugated bulkhead or to fit the frame above deck level.
Available in four standard sizes with 120mm width (internal).
Contact Modern World Yachting Equipment at: equipment@mwyachting.nl
Round Transits - Sleeves
Hawke´s Sleeves effectively seal cables and pipes passing through circular apertures, and pressure seal against fire, water and gas. The seal is formed by tightening the compression bolts which expand the system radially, this causes pressure to be exerted against the aperture wall and closes down the tolerant blocks.
HRTO
Hawke HRTO is a round sealing solution for multiple cables/pipes passing through a circular aperture in a wall or bulkhead/deck. The seal is formed by tightening the compression bolts which expand the system radially with no need of a compression system. Hawke HRTO is supplied as an open frame so that it can be installed after laying the cables or pipes.
Manufactured in intumescent elastomer polymer with stainless steel front and backplates. The plates are also available in mild steel.
HRST
Hawke HRST is a round sealing solution for a single cable/pipe passing through a wall or bulkhead/deck. Each size of HRST frame can seal a large range of diameters without any onsite modifications. The HRST is able to seal services from 4mm up to 170mm of external diameter (standard version). A larger size can be requested!
Manufactured in intumescent elastomer polymer with stainless steel front and backplates. Each HRST frame has a gasket to prevent galvanic corrosion when installed within a mild steel sleeve.
Assembly Parts
Tolerance blocks
Hawke HF tolerant blocks are designed to accommodate cables/pipes passing through the frame. Their special design incorporates five contact points which allow the blocks to accommodate a range of different diameters and accept variances in cable/pipe diameter. Each block has a sealing range of 3-4mm without the need for any onsite modifications. The tolerance blocks are easily installed resulting in zero waste material. Also, the colour-coding allows for correct visual inspection. Inspecting the system visually at a glance is possible with the colour-coding!
Also, Hawke’s unique inspectable colour code make installation easier, faster and allows a visual inspection of the transit when complete.
Reference list
- Perini Navi
- Bottoccoli
- Intermarine
- San Lorenzo Group
- Cantalupi
Here at Modern World Yachting it is our mission to offer our clients high-class and green-labelled equipment with a service to be proud of.
Our goal is to work hard into growing our brand and expanding our service into the international Yachting market.
- +31 6 14 71 79 75
- info@mwyachting.nl